|
Download Service
Frequently Asked Questions
Feedback
Get Supports from Phoenix-Award
Contact nearest DTK
|
FAQ #12
After updated the BIOS, I powered on my computer, I was unable to see anything on my monitor.
I only heard one long beep and two short beeps? What's happened on my computer?
Ans: The BIOS didn't be flashed successfully. Now, the BIOS was checking sum error,
there are two methods to recover BIOS.
1. Using EPROM Writer:
You have to take out BIOS chip, put it on EPROM Writer, then load BIOS file and program it.
2. Recover the damaged BIOS by software flash :
(1). Running Award BIOS Flash Program on a working motherboard that is running Award BIOS.
(2). Load BIOS file, then ignore any error message and press "N".
(3). When you see a message "Are you sure to program?" , take off the BIOS chip from working motherboard,
and put the damaged BIOS chip on the motherboard.
(Attention: you must be careful to do the step #3, otherwise your motherboard will be burned-out.
DTK Computer assumes no responsibility for any damages resulting from improper use or lack of technical
expertise.)
(4). After finish to exchange BIOS chip, press "Y" to program BIOS chip. Then take out BIOS chip and put it
on the original motherboard.
Back to FAQ's
|
